# VESC2X3Bridge

The VESC2X3Bridge is a Project I started at the end of 2025. It tries to integrate the X3 Scooter Series from Ninebot into the world of VESC, an open source project from Benjamin Vedder.

This Repo provides the PCB files for the board of the VESC2X3Bridge. It allows almost plug and play installation with minimal configuration required on the VESC and Bridge side.

## How do I create a PCB with the files?

1. Clone this repository and open it with KiCAD
2. Use the "Fabrication Outputs" option to generate the required files for your PCB manufacturer.

<img src="https://media.discordapp.net/attachments/1484589733932830810/1484589753570693221/image.png?ex=69bec773&is=69bd75f3&hm=8f9db0c190a1125b79901996c782525d298798a685708147448ac20ca4147bc0&=&format=webp&quality=lossless" alt="Failed to load image">

3. Upload the files to (for example) JLCPCB and choose 2 Layer PCB board.
4. After you received your PCB, the development can begin :)

# License
This PCB design is released under the [CC BY-NC-SA 4.0 License](https://creativecommons.org/licenses/by-nc-sa/4.0/).

## What you can do
- Share and adapt this design for personal or hobby purposes
- Give credit to the original author (Finn Tews)

## What you cannot do
- Use this design for commercial purposes
- Remove or obscure attribution
- Re-license derivatives under more restrictive terms

---

## Attribution example
If you use or modify this design, you can credit it like this:

> "PCB design by Finn Tews, licensed under CC BY-NC-SA 4.0"